ColorFader3™ CYM Color-Mixing Color Changer
ColorFader3™ Full CYM Color-mixing Color Changers
From any color… to any color… anytime...
Only the Morpheus ColorFader3™ adds Continuous Color Control to your favorite fixtures: Ellipsoidals, Fresnels, PARs, 9-lights, Strobes… Choose the source and beam you want – then make smooth transitions from whatever color you select, to any other color, with ColorFader3™.
Continuous Color Control means an unlimited selection of colors that you can dial up from your DMX-512 console and fine-tune with precision. Simple gel scrollers lock you into the limited choices on the color scroll. To cross-fade you need two fixtures, or you can be forced to go dark on a fixture to get past undesired colors. With ColorFader3™ you’re never concerned with gel string position - the three independently controlled gel strings let you make smooth, full-color transitions directly from any color to any color, anytime. Two-scroll “color mixing” scrollers cannot do this without passing through unwanted colors.
ColorFader3™ is the fastest color mixing scroller for conventional luminaires. Each of the three independently controlled scrolls is six aperture widths long - so they need to move a substantially shorter distance to go from clear to full saturated color than other systems do. Shorter gel-strings can move faster… much faster or, if noise level is a concern, they can move quieter… much quieter… because there’s 40% less gel to move.
The ColorFader3™ is available in four sizes:
SFader3™ has a 5” round aperture to fit Compact Ellipsoidals (Source Four® type) with Standard Lenses and small Fresnel fixtures. It is convection cooled and is the quietest color mixing scroller on the market.
MFader3™ has a 7.5” round aperture to fit PAR64-type fixtures (Source Four® PAR or Conventional), Compact Ellipsoidal fixtures with wider-angle lenses and medium Fresnels. It’s single, variable- speed fan is DMX addressable and can be remotely controlled from any console.
XLFader3™ has a 15” x 16” aperture to fits 9-Lights, or can be fitted with a 15” round trim ring to fit Large Fresnels and Parabolic Sources. Six variable-speed fans are DMX addressable and can be remotely controlled from any console.
8Fader™ was specifically built to fit the Thomas 8-Light, with a 25” x 16” aperture. We’ve also adapted it to bring CYM color mixing to banks of Strobe fixtures. Six variable-speed fans are DMX addressable and can be remotely controlled from any console.
The ColorFader™ PS-6™ distributes power and control signal for up to six SFader3 ™ or MFader3™ units or, up to three XLFader3™ or 8Fader™ units.
Download more information on ColorFader3™
